Type 8791

Office /23

- Headquarters
  Christian Bürkert GmbH & Co. KG Christian-Bürkert-Straße 13 - 17
  74653 Ingelfingen
  Phone +49 7940 10 0
  Fax +49 7940 10 91204
  E-Mail vasb@ohexreg.pbz
- Office
  Bürkert GmbH und Co. KG Christian-Bürkert-Straße 13 - 17
  74653 Ingelfingen
  Phone +49 7940 10 0
  Fax +49 7940 10 91448
  E-Mail vasb@ohexreg.pbz
- Office
  Sales Center Süd Christian-Bürkert-Straße 13 – 17
  74653 Ingelfingen
  Phone +49 7940 10 91111
  Fax +49 7940 10 91448
  E-Mail FnyrfPragre.Fhrq@ohrexreg.qr
- Office
  Sales Center Nord Rendsburger Straße 18
  30659 Hannover
  Phone +49 511 9 02 7650
  Fax +49 511 9 02 7660
  E-Mail FnyrfPragre.Abeq@ohrexreg.qr
- Office
  Technik Center Ingelfingen Christian-Bürkert-Straße 13 – 17
  74653 Ingelfingen
  Phone +49 7940 10 91110
  Fax +49 7940 10 91428
  E-Mail grpuavx@ohexreg.pbz
- Office
  Technik Center Hannover Rendsburger Straße 14
  30659 Hannover
  Phone +49 7940 10 91110
  Fax +49 7940 10 91428
  E-Mail grpuavx@ohexreg.pbz
- Office
  Sales Office Berlin Volmerstraße 10
  12489 Berlin
  Phone +49 30 67 97170
  Fax +49 30 67 971766
  E-Mail vasb@ohexreg.pbz
- Office
  Sales Office Dortmund Holzener Straße 70
  58708 Menden
  Phone +49 2373 96 810
  Fax +49 2373 96 8150
  E-Mail vasb@ohexreg.pbz
- Office
  Sales Office Frankfurt Am Flugplatz 27
  63329 Egelsbach
  Phone +49 6103 94 140
  Fax +49 6103 94 1466
  E-Mail vasb@ohexreg.pbz
- Office
  Sales Office Hannover Rendsburger Straße 18
  30659 Hannover
  Phone +49 511 9 02 760
  Fax +49 511 9 02 7666
  E-Mail vasb@ohexreg.pbz
- Office
  Sales Office München Elsenheimerstraße 47
  80687 München
  Phone +49 89 82 92 280
  Fax +49 89 82 92 2850
  E-Mail vasb@ohexreg.pbz
- Office
  Sales Office Stuttgart Ulmer Str. 4
  70771 Leinfelden-Echterdingen
  Phone +49 711 4 51 100
  Fax +49 711 4 51 1066
  E-Mail vasb@ohexreg.pbz
- Office
  Bürkert Innovation Center Albert-Nestler-Str. 17
  76131 Karlsruhe
  Phone +49 7940 10 94101
  Fax +49 7940 10 91204
  E-Mail vasb@ohexreg.pbz
- Office
  Bürkert Campus Criesbach Keltenstraße 10
  74653 Ingelfingen-Criesbach
  Phone +49 7940 10 96510
- Office
  CUT Membrane Technology GmbH Feldheider Str. 42
  D-40699 Erkrath
  Phone +49 2104 176320
  Fax +49 2104 1763222
  E-Mail svygengvba@ohexreg.pbz
- Office
  Schwarzer Precision GmbH & Co KG Am Lichtbogen 7
  D-45141 Essen
  
  Phone +49 201 316 970
  Fax +49 201 316 97 29
  E-Mail vasb@fpujnemre.pbz
- Systemhaus
  Systemhaus Ingelfingen Keltenstraße 10
  74653 Ingelfingen-Criesbach
  Phone +49 7940 10 0
  Fax +49 7940 10 91204
  E-Mail vasb@ohexreg.pbz
- Systemhaus
  Systemhaus Dortmund Holzener Straße 70
  58708 Menden
  Phone +49 7940 10 0
  Fax +49 7940 10 91204
  E-Mail vasb@ohexreg.pbz
- Systemhaus
  Systemhaus Dresden Christian-Bürkert-Straße 2
  01900 Großröhrsdorf
  
  Phone +49 7940 10 0
  Fax +49 7940 10 91204
  E-Mail vasb@ohexreg.pbz
- Plant
  Bürkert Werke GmbH & Co. KG Christian-Bürkert-Straße 13 - 17
  74653 Ingelfingen
  Phone +49 7940 10 0
  Fax +49 7940 10 91204
  E-Mail vasb@ohexreg.pbz
- Plant
  Bürkert Werke GmbH & Co. KG Keltenstraße 10
  74653 Ingelfingen-Criesbach
  Phone +49 7940 10 91613
  Fax +49 7940 10 91615
  E-Mail vasb@ohexreg.pbz
- Plant
  Bürkert Werke GmbH & Co. KG Landauer Straße 24
  74582 Gerabronn
  Phone +49 7952 9609 92179
  Fax +49 7952 9609 92150
  E-Mail vasb@ohexreg.pbz
- Plant
  Bürkert Werke GmbH & Co. KG Schleifbachweg 40
  74613 Öhringen
  Phone +49 7941 92 990
  Fax +49 7941 92 9993150
  E-Mail vasb@ohexreg.pbz

Main Office
Headquarters
Systemhaus
Distributor
Office
Plant
Logistic center

Type Description

The robust and compact positioner is designed to a standardisation acc. to IEC 534-6 or VDI/ VDE 3845 for assembly with linear and rotary actuators. In addition, the remote version with the displacement position sensor can be combined with Bürkert process control valves The setpoint setting for the electro-pneumatic digital Positioner SideControl BASIC occurs using a standard signal 4…20mA or with AS-Interface as an option. In addition there is a binary input and an optional analogue feedback available. The valve opening is signalled by a mechanical indicator element and the device staus is shown on three coloured LEDs. All the operational elements are found in the housing . The start-up happens automatically, and directly at the device the following functions can be activated through DIP switches: - Close tight function - Inversion of the operating direction of the setpoint signal - Characteristic curves selection - Switching between manual and automatic mode. Additional possibilities on configuration and parameter setting, for example, linearisation of the operation characteristics by using communications software which allows customised programming. The pilot valve system can be used equally for single and double-acting drives. It is characterised by a defined safety feature in case of failure of the electrical or pneumatic power supply and possesses an enormous air capacity range with pressure supply up to 7 bar.

Compact and robust design
Easy to start using Tune function
Dynamic positioning system with no air consumption in controlled state
AS-Interface Fieldbus (optional)
Mounting acc. to IEC 534-6 / VDI VDE 3845 or Remote

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Downloads

Data Sheets

Description	Filesize	Language / Country
Type 8681 data sheet \| installation kits for hygienic process valves	4.6 MB	EN / EU
Type 8791 data sheet \| digital, elektropneumatic positionerSideControl	841.3 kB	EN / EU
Tipo 8791 hoja de datos \| regulador de posición electroneumático: Positioner SideControl	4 MB	ES / ES
Typ 8681 Datenblatt \| Adaptionen für hygienische Prozessventile	4.6 MB	DE / DE
Typ 8791 Datenblatt \| digitaler, elektropneumatischer Stellungsregler SideControl	870 kB	DE / DE

User Manuals

Description	Filesize	Language / Country
Additional manual Type 8681 8694 869X 879X \| USB Interface for serial communication	2.1 MB	EN,FR,DE / EU
Additional manual Type 8791 8792 8793 \| Positioner and process controller, ATEX approval	507.5 kB	EN / EU
Electropneumatic positioner	2.3 MB	EN / EU
Quickstart Type 8791 \| Side Control BASIC, electropneumaticpositioner	3.6 MB	EN / EU
Service manual Type 8791 87928793 \| External position feedback with proximity switch	1.1 MB	EN,FR,DE / EU
Software manual Type 8694 8696 8791 \| Positioner - Softwaretool for communication	5.2 MB	EN,FR,DE / EU
Software manual Type 8920 \| Bürkert-Communicator	981.8 kB	EN / EU
Bedienungsanleitung Typ 8791 \| Positioner Side Control BASIC	2.1 MB	DE / DE
Manuel d'utilisation Type 8791 \| Positionneur Side Control BASIC	2.6 MB	FR / FR
Manuel supplémentaire Type 8791 8792 8793 \| homologation ATEX	554.7 kB	FR / FR
Quickstart Typ 8791 \| Positioner Side Control BASIC	3.6 MB	DE / DE
Quickstart Type 8791 \| Positionneur Side Control BASIC	3.6 MB	FR / FR
Software manual Type 8920 \| Bürkert-Communicator	984.4 kB	DE / DE
Software manual Type 8920 \| Bürkert-Communicator	997.1 kB	FR / FR
Zusatzanleitung Typ 8791 8792 8793 \| ATEX-Zulassung	504.8 kB	DE / DE

Software

Description	Filesize	Language / Country
Buerkert Communicator 3.1.2	178.7 MB	ML / AF
PACTWARE4_1 SP1_.NET2_DTM Coll 4.1	252.4 MB	ML / AF
PACTware 5.0 + DTM Collection 5.0	315.9 MB	ML / AF
Positioner DTM Collection 1.0	13.8 MB	ML
USB-Driver WIN 7,XP (32,x64) A.01	2.2 kB	ML

Do you have questions?

Type 8791 - Digital electropneumatic Positioner SideControl

Type Description

Can be combined with

Applications & Tools

Downloads

Data Sheets

User Manuals

Software

EU Declaration

Flyers and Catalogues

Available products

Digital electropneumatic Positioner SideControl

Ident No. 211521

Ident No. 211522

Ident No. 211523

Ident No. 211524

Ident No. 211525

Ident No. 211531

Ident No. 211532

Ident No. 211533

Ident No. 211534

Ident No. 226834

Ident No. 226835

Ident No. 239617

Ident No. 239618

Ident No. 310303

Ident No. 310304

Ident No. 310305

Ident No. 224868

Ident No. 224869

Ident No. 234576

Ident No. 234578