You are using an outdated browser. Unfortunately, this does not allow us to guarantee that our website can be used without any errors. The use of outdated browsers often leads to low speed and security problems, too. We recommend that you install a new version or an alternative browser to get the full functionality of our website.
Type 0131
- Direct-acting 2/2-way or 3/2-way toggle valve
The depiction of the products may differ from the actual specific design.
Please consider the technical attributes and Data Sheets.
Type Description
The 0131 valve is a direct-acting toggle valve. A variety of seal material combinations are available depending on the application. Thanks to the diaphragm separation between actuator and fluid housing, aggressive media such as acids and alkaline solutions can also be safely controlled. The assortment is rounded out with plastic housings made of PVC. The solenoids are moulded with a highly resistant chemical epoxy. “Kick and drop” electronics are moulded into all DC solenoid variants for reduced electrical power consumption. An optional electrical position feedback sensor reliably detects the switching position. Conformity with KTW and W270 are available for drinking water applications. Furthermore, versions of type 0131 are available that conform with DIN EN 45545:2016 (standard parts 2 and 5) – fire protection in railway vehicles.
Direct-acting media-separated valve up to DN 20
Vibration-proof, block screwed solenoid system
Energy-saving power reduction for all DC variants
Increased safety due to electrical position feedback (optional)
Robust, service-friendly manual override
For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.