In many applications, the right kind of water is a decisive factor. For technical and economic reasons, water for many industrial processes often has to be modified in order to provide for the required water quality. Depending on the process, a variety of different quality criteria may be of importance, involving properties such as conductivity, the pH value, hardness, sulphate content or chloride content.
In principle it’s a matter of finding the right mixture
Two different techniques are used to obtain the desired quality for process water. For this purpose, our solutions mix two water streams of different quality either through the principle of proportional regulation or the principle of quality regulation. We have developed a standard system that caters for both of these solutions. The system can be adapted to suit the application, so that the respective requirements are reliably met and the highest degree of process water quality is achieved.
One principle to obtain the desired quality for process water involves regulation on the basis of fixed proportions. For this to work properly, the quality of the water from the input sources must remain constant. The correct proportions of raw water and deionized water, for instance, are mixed by the blending unit.
The second principle is the quality regulation. Two different water qualities are combined to achieve a predefined output quality for the conductivity. Downstream of the blending process, the water quality is monitored continuously (conductivity) and maintained by means of regulating the blending proportions.
The right water quality can only be achieved by selecting the right components. We can provide the best-fit solution, whether based on a standard solution or an individually tailored system. Depending on requirements, the piping, the process control, the sensor system and the control valves can either be pre-assembled or customized configured from individual components. Contact us.
Get more information
Blending unit for high process water quality
Finding the best blend for the right water quality
Your challenges, our solutions
When it comes to blending water and maintaining a specific degree of water quality, success depends on exact measurement and dosing of the process water and make-up water. To ensure that all requirements are reliably met, Bürkert provides individual water-blending solutions for water treatment that can be used in a wide range of applications.
To prevent corrosion and deposition in humidity and air-conditioning plant, the quality of the make-up water must often be adjusted by means of blending raw and pure water. Where liability claims are involved, a major factor concerns the question as to whether prescribed limit values have been adhered to. In order to ensure the economical viability of water treatment, an operating point is computed which determines where the least possible amount of treated water is required. To this end, the treated water is blended with untreated water in a certain proportion to produce make-up water.
Cooling tower make-up water
In cooling towers, too, it is necessary to supplement process water with make-up water to prevent corrosion and deposition on account of substances concentrating in the water. The limit values for the process water are specified by the plant manufacturer, and maintained by the addition of make-up water. To this end, treated water is blended with untreated water in a certain proportion to produce cooling tower make-up water.
The quality of a type of beer depends on the quality of the brewing water, because it has a significant effect on the taste of the beer. In order to maintain a constant high quality, the raw water often has to be almost completely desalinated by means of a membrane plant first, and then blended to produce the desired quality. Therefore practically all membrane plants for brewing water treatment contain a blending unit to ensure exact blending parameters and uniform water quality.
Poor raw water quality for irrigation can lead to over-salinisation of the soil or a shift in the soil structure. This has a negative effect on the quantity and quality of the yield. In view of this, water for irrigation is produced by adding substances required for growth to completely desalinated water. In this process, the blending unit can lower the cost of additional chemicals through exact dosage. Especially where large quantities of irrigation water are involved, blending the water can make sound economic sense.
Drinking water supplies are subject to extremely high quality requirements. In this respect, long-term maintenance of health requirements and the prevention of damage due to corrosion and deposition, for instance, both play very important roles. Following treatment of the water through deionizing or reverse osmosis, the water has to be blended in order to comply with the locally specified limit values. Corrosion and deposition can be avoided through optimal balancing of the calcium / carbonic acid proportions, for instance.
Get more information
Bürkert Systemhaus – where your ideas feel at home
Working in partnership with you, we develop individual solutions that precisely meet your expectations.
Christian Bürkert GmbH & Co. KG
D-74653 Ingelfingen, Germany
Telefon: +49 (0)7940 10-0
Telefax: +49 (0)7940 10-91 204
Do you have any questions? Don´t hesitate to contact us.