Direct measurement in the main flow.
Pneumatic valves may be optionally equipped with manual overrides.
Mass Flow Communicator communication software
Mass spectrometry (MS) is a firmly established part of biotechnology, specifically, for example, for analysis of proteomes.
Simplified electrical diagram of the measurement bridge circuit (resistors placed directly in the flow channel)
Function diagram of the bypass sensor in CMOSSens - technology (cross section from the bypass channel)
Sketch of a bypass sensor block
Diagram of volume flow change, depending on the measurement position
Principle of Full MID
PT100 resistance characteristic
There is a clearly recognizable trend in chemistry towards smaller reactors, specifically for research and development, but also for production of fine chemicals with production volumes of a few metric tons per annum.
These systems cover devices for simultaneously conducting reactions under individually adjustable conditions such as temperature, pressure and composition.
Operating medium/calibration medium
All solenoid-operated control valves for pneumatic actuators are chiefly designed for operating voltages 24 V DC and 24, 110 and 230 V, 50 Hz conventional in the various branches of industry.
With orifices, the gas quantity is obtained by deriving it from the pressure differential.
Measuring principle ORP value
magnetic, optical, stainless steel
A permanent magnet is integrated into a paddle.
A specific DNA quantity is required for DNA analysis.
Measuring principle pH value
Principle of piezoresistive sensor
Bürkert pivoted-armature solenoid valve
Direct-acting 2/2-way plunger-type solenoid valve, shown closed at left and open at right